Importance of integrity and communication free essay sample

Integrity In the US Army Is defined as doing whats right, legally and morally. Integrity Is a quality you develop by adhering to moral principles. It requires that you do and say nothing that deceives others. As your integrity grows, so does the trust others place in you. The more choices you make based on integrity, the more this highly prized value will affect your relationships with family and friends, and, finally, the fundamental acceptance of yourself. Integrity has also been defined as Moral soundness; honesty; freedom from corrupting Influence or motive by a good friend of mine and college graduate. The dictionary describes It as Unimpaired, unadulterated, or genuine state: entire correspondence with an original condition; purity. I enjoy Heralds definition more than the official definition, however, the genuine state part of the dictionary definition is also really good. Another friend gave a similar response: morality, high standards. We will write a custom essay sample on Importance of integrity and communication or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Yet another friend from my high school, gave a longer, more unique assessment of the term: Integrity Is the Idea of forcing yourself to adhere to some code of values, either wanted or unwanted, and in the end giving up what you want to conform to your definition of worth through integrity. That is obviously a more cynical view of the ERM, which I dont totally agree with. My friends and I pretty much agree what Integrity is. Morals and honesty. Those are what make our society work. Without It, we have anarchy. Basic human decency helps us live In a basically good world. F course It Is not perfect (see: gang members, terrorists, and the likes), but those who choose to live their lives with good morals and integrity make it a better place for everybody else. The cynical view taken by my friend Tom simply cannot be used. If were all forced to comply, we would have a much safer world. Nobody forces us to do anything, and that is the point. Our arsenal Integrity can only be formed by one person: ourselves. Nobody can control out Integrity. They can try to sway It (and they do almost dally), but they cannot change it unless we allow it to be changed.Integrity is absolutely vital too community. If a community as a whole, coherent, machines does not have morals, it will be a very bad community. The people in it will not flourish, the kids will grow up bad, and It will be a continuous cycle of immorality. Is a community has no Integrity, It brings down the whole area around It. We tend to Integrity is very important on a college campus. College is a synonym for the rod freedom. You live on your own, and the only people you answer to is the school or the police. So it is up to you to make the decisions that are right for your life.Because even more so in college, where you live with your friends, are there choices to be made every single day. And they all could affect your life. Without integrity on a military bases, you have anarchy, because there are very few consequences in most situations. If there is a huge party and somebody decides he wants to do something bad, usually it is impossible to tell who did it because it is a party and there are usually a lot of things going on. Obviously, one of the biggest scenarios on a military bases is rape.The girl gets drunk enough, gets taken out and raped and the guy leaves. The only problem is that if the party is big you may have a couple hundred guys who all dress the same (sure were all unique, but we have basic styles and trends). So who is held accountable for the atrocity? Nobody. In some cases they do find the man who committed the crime, but not always. That is when personal integrity comes in. Besides the horrible aspect of rape, which unfortunately has become one of the top military horror stories across the nation, integrity also comes in when drinking.Im not saying Eve not had more than a couple drinks at a party, nor am I saying Eve never been drunk. To say that I would be a hypocrite and a liar. However, what people do not realize is that they dont have to get wasted or trashed all the time. People somehow got this idea that they had to get totally plastered or they would not be perceived as cool, and drink way too much. For lack of a better phrase, have some integrity man! I mean, you do not have to drink and go into an altered state to have fun. You can have one or two, talk to some people, and have a great time.If you absolutely need to have a few drinks to have a good time, you have problems, and need help. Now the same principal of basic integrity goes for barracks life. If youre going down the hall to the bathroom, or maybe even downstairs to get a snack, you do not always want to have to be locking and unlocking your door. In some barracks it is absolutely necessary, because flat out, people will go through your stuff and take what they want. And that makes for bad life on the base. Here, we can leave our doors unlocked and hang out in other peoples rooms if we want to, and it is a great atmosphere.

Free Essays on Steven Account Of Normandy Invasion

Normandy Invasion The battle plan, code-named Operation Overlord, called for the largest amphibious assault ever to start the liberation of occupied Europe from Nazi Germany. It began in the early morning hours of June 6, 1944, now known as D-Day. Thousands of American, British, Canadian, and French soldiers-backed by paratroopers, bombers, and warships-stormed a 50-mile stretch of French beach called Normandy. This "invasion of Normandy" was the greatest event to occur between the years of 1919 and 1945. D-day was the beginning of the end of the war. The invasion of Normandy allowed the Allied forces to get their soldiers back on the European mainland and to start defeating Germany. It was the major turning point of World War II and perhaps one of the greatest strategic military operations that was ever created. As the outcome of World War II began to change in favor of the Allies, U.S. General Dwight D. Eisenhower had the task of forming the largest naval invasion in history. If it was executed as planned, the landing would be the starting point for the massive attack on Germany. The attack would move eastward through France and into Germany territory. In May, while millions of troops and equipment poured into the staging area of southern Britain, the Allies created a decoy. False radio transmissions and rows of inflated rubber tanks and landing craft were positioned far from the true sight. This kept the Germans confused about the size of the attack. It also fooled them about were they thought it was going to be. The invasion of northern France from England was not launched in May, as it was planned originally, but on June 6. A huge fighting force had been assembled, including 1,200 fighting ships, 10,000 planes, 4,126 landing craft, 804 transport ships, and hundreds of amphibious and other special purpose tanks. During the operation, 156,000 troops landed in Normandy. 73,000 of them were American. They stormed by air and by se... Free Essays on Steven Account Of Normandy Invasion Free Essays on Steven Account Of Normandy Invasion Normandy Invasion The battle plan, code-named Operation Overlord, called for the largest amphibious assault ever to start the liberation of occupied Europe from Nazi Germany. It began in the early morning hours of June 6, 1944, now known as D-Day. Thousands of American, British, Canadian, and French soldiers-backed by paratroopers, bombers, and warships-stormed a 50-mile stretch of French beach called Normandy. This "invasion of Normandy" was the greatest event to occur between the years of 1919 and 1945. D-day was the beginning of the end of the war. The invasion of Normandy allowed the Allied forces to get their soldiers back on the European mainland and to start defeating Germany. It was the major turning point of World War II and perhaps one of the greatest strategic military operations that was ever created. As the outcome of World War II began to change in favor of the Allies, U.S. General Dwight D. Eisenhower had the task of forming the largest naval invasion in history. If it was executed as planned, the landing would be the starting point for the massive attack on Germany. The attack would move eastward through France and into Germany territory. In May, while millions of troops and equipment poured into the staging area of southern Britain, the Allies created a decoy. False radio transmissions and rows of inflated rubber tanks and landing craft were positioned far from the true sight. This kept the Germans confused about the size of the attack. It also fooled them about were they thought it was going to be. The invasion of northern France from England was not launched in May, as it was planned originally, but on June 6. A huge fighting force had been assembled, including 1,200 fighting ships, 10,000 planes, 4,126 landing craft, 804 transport ships, and hundreds of amphibious and other special purpose tanks. During the operation, 156,000 troops landed in Normandy. 73,000 of them were American. They stormed by air and by se...

Comparing and Contrasting File Systems used by Windows Essay

Comparing and Contrasting File Systems used by Windows - Essay Example This paper presents a comparison between the key file systems used by Windows Operating System - FAT16, FAT32 & NTFS and also provides a brief introduction on Encrypted File System. The File system in Windows can be selected at the time of installation of the Operating System, or at the time of creating a logical volume within a single physical hard disk or an array of hard disks using RAID 0, RAID 1 or RAID 5. Windows allows a very simple method to convert the file system of a logical volume from FAT 16 to FAT 32 or from FAT 32 to NTFS without taking down the server or loss of data. However, Windows doesn't allow a backward conversion from NTFS to FAT 32 or from FAT 32 to FAT 16. For a backward conversion, the disk needs to be formatted and volumes created again. The characteristics of a file managed by the Operating System in terms of size limitations & security depend upon the file system chosen. The File Allocation Table (FAT) actually is a registry of hexadecimal values that identify the location of clusters within a logical partition. This helps the operating system to locate all the clusters constituting a file. This process is important because all clus ters constituting a file are not stored at one place but are distributed across the entire Hard Disk Storage (a process called Fragmentation). The OS maintains two File Allocation Tables within a cluster such that if one is corrupted, the second can be used. The FAT assigns a hexadecimal address FFF7 to a bad cluster (due to surface or magnetic errors) such that the OS is able to recognize them while collating clusters to access a file. FAT16 has some distinct disadvantages that are addressed by FAT32 and FAT32 in turn have some distinct disadvantages covered by NTFS. The following section presents the differences among the three primary file systems and introduction to the other file systems that are supported by Windows XP, Windows Vista and Windows 2000/2003. File Systems supported by Windows XP and Windows 2000/2003: The FAT16 in earlier versions of MS DOS used to be 2 GB of logical partition (Volume) size but with the introduction of NT by Microsoft enabled it to support 4 GB of Logical partition (Volume) size. It has two primary limitations - length of file name and size of clusters in a 2GB/4GB partition. FAT16 supports a file size of only eight characters with three extension characters. No spaces in between characters were allowed. Moreover, the minimum cluster size in a 2GB/4GB partition is 32 KB. This lead to lot of wastage of disk space because file sizes of a few KBs used to block 32 KB clusters (A cluster cannot be shared; it is always dedicated to a file). THE FAT16 file system supported limited entries in the boot file and limited number of files per directory. These limitations of FAT16 were eliminated by Microsoft by

Multinational Enterprise (U.S.A) Essay Example | Topics and Well Written Essays - 3250 words

Multinational Enterprise (U.S.A) - Essay Example With a total area of 9,831, 513 square kilometers (Census bureau, 311), the United States is the third largest country in the world after Canada and the Russian Federation. The large stretch across the North American continent makes the country experience different kinds of climate and thus different types of vegetation. The region is thus a home to various species of plants and animals. This is a contribution towards being the country with the largest economy in the world. According to Population Reference Bureau (para.1), the US â€Å"is the third most populous country in the world after China and India† (See Appendix 2). The 2010 population census showed a figure of about 308 million and the population is currently estimated to be about 311 million (Population Reference Bureau, para.1; US Census Bureau, para.1). The population consists of individuals from diverse culture due to the slave trade that brought individuals from across the world into the country in the middle of the second millennium. There are Americans of African, Asian, Spanish, Mexican, or French origins that came into the country either as the conquerors or as slaves that were brought in to promote the agrarian and industrial revolution that was already taking place in the region. The presence of different cultures in the United States also led to different languages being spoken in the country. English is the most popular language in the country (Schmidt, 1). There are other languages like French, German, Spanish, and many others spoken in the country (See Appendix 1). For some period after the Second World War, a Cold War was experienced between the United States and the Union of Soviet Socialist Republic. USA was and remains to be a capitalist state whereas USSR was a communist state. The two federal states were fighting for allies from different countries and the power to monopolize the economy of the world. Each of the countries had expertise in the development of war weapons and was a threat to each other’s power to rule the world. The collapse of the Soviet Union in early 1990s led to the emergence of the United States as the worlds’ super power. Introduction A multinational enterprise (MNE) or Multinational Corporation (MNC) is an organization that operates or conducts business across two or more countries. The company produces its products and services and delivers the products/services to different countries. The organization usually has its central place of operations (the head quarter) located in one country called the home country and operates in other countries referred to as host nations. As globalization increases with an increase in competition in the local and global markets, most large organizations strive to establish themselves in other countries that perhaps may have better market opportunities, availability of materials for the production of the products or cheap labor that reduces the cost of production. The increased deregul ation and liberalization of local markets across the globe has attracted foreign investors into other countries in search of new market opportunities, raw materials that are readily available and cheap labor in these regions. In many cases, the developed nations are the source countries for most of the foreign direct investment as they have well established

Marketing Manager of the PVT Research Paper Example | Topics and Well Written Essays - 1000 words - 1

Marketing Manager of the PVT - Research Paper Example Thus, when it declines to list PVT among it best bidders, then there must a gross system or technological failure that Greg Morgan, the Solenergy’s chief electrical engineer noted from the electric equipment supplied to them by PVT. Morgan is portrayed as a competent person, especially in his judgments. Moreover, he has never misled Solenergy Company and its management in all matters left for him to deliberate upon thereby earning him the influence he has in the Solenergy development industry’s decision-making. Therefore, it will be pointless for the sales and marketing department of the PV Technologies, Inc. to peg their success on the personal relationship between Morgan and Salvatori. Apparently, the decision made from Morgan’s evaluation may not change based on the employee to employee relationship or business to business relationship but they can change on core values used as evaluating factors that led to the conclusion (Cespedes and Badame 05). From the understanding of the top management at the PV Technologies, PVT has been supplying reliable, durable, and efficient converters a fact that has not been confirmed by the customer, Solenergy in this evaluation. The evaluation parameters and the result are just but rumors that are yet to be confirmed to the PVT’s sale and marketing department or even to its executive. Therefore, it cannot be assumed that Morgan only pegged his evaluation on cost but not other factors that could be touching quality, efficiency, effectiveness, and durability. Moreover, it is apparent that PVT has been the main player in the market especially in the supply of electric converters. Since numerous players who have joined the same market, PVT must not assume that there are no other companies producing the same products, as in this case, converters with the same quality, durability, efficiency, and effectiveness and at lower costs than it thereby placing out of the  competition is.

Toyota Production System Case Study

Toyota Production System Case Study 1.1. Introduction The Toyota Production System (TPS) which was developed by Toyota Motor Corporation in 1970s is the Toyotas unique production approach and it becomes the worldwide application of production system in many companies (Moden, 1991). The main objective of TPS is to improve their manufacturing process by cutting off overburden and unevenness and elimination of waste in the process. The purpose of this assignment aims to assess the progress of a medium-sized construction company which is working in commercial projects and sometimes on design-build projects. As a representative of youth generation of the company, the author recognises that there are many problems existing in the process of executing a project of the company. Hence, benefit and reputation of the company is seriously affected by their defects on the process. In this report, the author will investigate all problems in the company in the terms of two phases in a construction project: pre-construction and construction phase. The author afterward will indicates the theory of lean in construction to apply in the company in order to solve problems. The improvement of the company will be analysed base on the model of TPS House diagram. Finally, the implementation and further development of the whole process will be discussed. 1.2. Company overview In this assignment, the author is going to analyse a construction company as described in assignment scenario. It is a medium sized construction firm working mostly on traditional office and commercial projects (gained through bidding) and sometimes on design-build projects. As a construction firm, the company is aware of the role of planning is the vital process of any project. Harris (2006, p65) indicated two types of planning which are strategic and operational planning. The first type has been executed by the client and integrated team which involves proposal outline of the project such as scopes, procurement route, time and financing. The operational plan, in contrast, will depict the process achieved in each stage of project in detail. The operation of planning process and involved problems of the company will describe below: The company has a systematic planning and management system for construction projects, starting from a master schedule and related partial plans for plant, personnel, materials etc. ; plans for shorter term are derived from the master plan, extending to weekly plans, and the progress is monitored and feedback to management. The current issue is the usage of the plan; it seems not being attracted staffs to the master plan, as people mostly do not study this plan. Even if the master plan is used, all of the tasks in this plan are not sorted in logical way, hence the plan looks chaotically. Consequently, the project cannot go smoothly and the company always meet an anxious rush when the deadline is coming. The company could starts their construction process in just two weeks after winning the bid, even if the project has been happening for years and it has been designed for one year. So that, sometime the contractor does not have enough preparation for their work, they will start the work as soon as they can. Financial control in the company is tight, and every material and work package is procured for its lowest price. Sometime, the construction works in the site have to be delayed or even stopped due to shortage of material and labour resources in the construction site, especially in big project, those situations happen regularly. The communication on the site is not really good. It is the lack of collaboration among sub-contractors. The site personnel of company often seem to be exhausted by long hours and constant troubleshooting The company seems too difficult to adapt the design and build projects when they are the DB contractor of a project. This thing results from insufficient of design experience control of the company and the management experience of DB procurement method which is very popular in construction industry in the United Kingdom Finally, the amount of physical waste transported from site is very lager; moreover the benefits from tight financial control seem to be lost by such cost leaked. As shown in the description above, it is obviously to see that the company has many disadvantages in order to manage a project. In the later parts of the assignment, the author will try to analyse particular problems and make improvements based on the Toyota Production System theory. Chapter 2: Analysis of production process in the company 2.1. General outline of the process map Oberlender (2000, p140) concluded planning is the vital process of any project, the better planning is, the better project is achieved. In a construction project, Harris (2006, p65) indicated that there are two types of planning which are strategic and operational planning. The first type has been executed by the client and integrated team which involves proposal outline of the project such as scopes, procurement route, time and financing. The operational plan, in contrast, will depict the process achieved in each stage of project in detail. In this assignment, the whole map of operation plan in construction process which is include the planning and execution process and the service procurement process will be drawn and analysed in order to make the appropriate improvement of the company. 2.2. Current process of the company In this assignment, the author is going to use UML activity diagrams to illustrate the map of pre-construction and construction processes. Fig 1 below show processes of construction project including pre-construction and construction stage which is applied in the company. Figure 1: Pre-construction process Figure 2: Construction process 2.3. Analysis of pre-construction process (1-12) 2.3.1. Description of the map In the pre-construction stage, the company will divide construction work into many work packages and develop plans for tendering. They have to prepare all the information about project and open a tender; finally they will choose suitable sub-contractors and material suppliers. There are two main phases of this stage which are production information and tender action. Production information: normally, the DB contractor will divide the whole work into many work packages with information of work, responsibility, schedule and the cost for each package. The purpose of this phase is to help all the sub-contractors understand and prepare what they have to do with their package. However, to do this, sub-contractors need to prepare and win for the tender of those packages. Even three principles of a good project which are time, quality and cost are considered; the company always put the low price as the top of priority. Tender documentation and tender action: the company will be the client of work packages which are executed by sub-contractors. Sub-contractors are required to spend time to study product documents as they want to take part in the tender i.e. work packages. They also need to prepare the tender document and arrange for their own plan of works before they submit those documents to main contractor. Based on the quality of the tender documents and the reputation of sub-contractors, the company will select suitable contractors for each package and prepare the contracts with them. Normally, the contractors which offer the best price will be selected. 2.3.2. Existing problems in the process There is insufficient information from the company in tender action; moreover the company really focus on the cost and the lowest price contractor would be selected. Consequently, many aspects of project have been neglected i.e quality and time. 2.4. Analysis of construction Stage (13-49) 2.4.1. Description of the process This is the main stage of any project with the end product is the whole CTG. The stage starts when the company establishes contract to sub-contractors which was indicated in the previous stages. Sometimes the design changes or the design teams make some modifications. The changes in design in DB procurement will lead to many risks to client, so that before executing the works, main contractor and sub-contractors should spend time to review the detail design and make recommendation in order to avoid the risks. During the stage, the company is the main actor who arranges the site, and executes main works such as excavation, main building structure and so on; meanwhile sub-contractors should have their own plan for implementing their works at the right time. According to Angus (2003, p137), in this stage, changes may be obliged in either term design or construction even they are not expected in advance. If the changes happen, the cost of the project will change, the result may be serious in DB procurement method. Hence, in this stage, correct planning and sufficient controlling can be the most critical issue to achieve the construction of project. Whenever, the change is achievable, all of the concerned parties should take part in discussions in order to find a way to reduce the bad effects as much as possible. The current planning process can be divided by four main parts as follow: General Master Plans (made 3 monthly for the whole life time of the project; process 13-16): Planning department under the control of project manager will develop the master plan in order to make sure the project will be executed within the specified constrains with the association of health and safety problems (Mawdesly, 1997). Develop Sectional Master Plans (made monthly for the next 3 months; process 17-25): The General Master Plan will be developed by the planning department based on the general master plan and scopes which are issued by Project Manager (Mawdesly, 1997). More detail plan for personnel, labours and material will be extend to ensure that aims of general master plan will be attained. Once all the departments receive the sectional master plan, they have to review the plan and make revisions in order to make a feasible plan for the whole teams. Develop Weekly Plans (made weekly for next 3 weeks; process 26-36): Weekly plans are derived from the Sectional Master plan. All the involved parties have to develop their own plan and make the recommendation to Planning department in order to establish an appropriate plan. According to Mawdesly (1997, p10) the weekly plan have to ensure the efficiency of resources indicated from the previous plan so as to reach the project objectives. Construction process (36-48): The construction works begin with the preparation of construction site. As the main contractor, the company will execute all the main work on site, meanwhile other contractors (sub-contractors, material suppliers) need to have plan to deliver their products as indicated on their plans. Every week, all of the contractors require issuing the progress report and sending them to project manager and clients organisation in order to control the construction works. This schedule, according to Mawdesly (1997), there is little change of the plan because it will badly affect to construction progress of a project when uncertainty happens. 2.4.2. Problems happen in the process The company always implement the project very soon after they win in a tender, sometimes they could not gather adequate inputs from involved parties. As the result, less realistic and practical schedule are issued. Due to the lack of communication among parties in the project organisation, the general master and the sectional master plans are not appropriate and the conflict happens within sub-contractors. There is not enough update for weekly schedule because of deficiency of attention on planning and the shortage of management skills. Thus, uneven workloads are unavoidable and almost sub-contractors have to rush near the deadline in order to finish works. As consequent, many critical aspects of successful project such as quality and time are not guaranteed. The company put the low price tender at the top of priority results in huge amount of unused inventory in construction site. Hence, in every project, there is large number of wastes occurring. In addition, lowest price will result in bad quality of material using in projects. As indicated above, an inappropriate schedule will lead to a problem of material distribution which is sometimes there are superabundant materials on site whereas sometime lack of material. All those things have bad results in bad performance of the construction process. 2.5. Other problems in construction site 2.5.1. Team work and collaboration As mentioned in the company overview, the communication and collaboration among parties in a project is not good. This problem results in many errors on the construction site and when the argument occur the progress of construction will be affected. 2.5.2. Staffs motivation The assumption of the company indicated that their staffs are not interested in making plan scheduling for the project and they seem not to have enough motivation to contribute to the development of those plan. There are many reasons cause the low motivation of staffs. One of them may come from the lack of communication and team-work among members; staffs sometimes do not know what they should do. The poor quality of plan is also another reason for the motivation of staffs. 2.5.3. Physical waste on site. Based on the theory of Toyota production system which was presented by Liker, J., K. (2004), there are seven type of waste (Muda) in this scenario, they are: Overproduction Waiting Transportation Inappropriate processing Unnecessary inventory Unnecessary movement Defects In this assignment, those issues below are main reason for physical waste on site: Unnecessary transport or conveyance; Excess inventory and Unnecessary movement: Due to poor quality plan schedule (in both sectional and weekly plan), the plan of delivery material is not suitable, resulting in those type of wastes. Defects: The bad quality material and design will cause many defects to the project. Hence, reparation, re-construction or replacement of any structures will increase waste in project. Chapter 3: Toyota Production Lean Principles 3.1. Introduction into Lean Principles According to Liker (2004), the major idea of Lean production is to maximiseÂÂ  the value for customer while getting rid of waste added in the production process. In the other ways, lean production indicates producing more value for customers withÂÂ  fewer resources. The lean production, in other words Toyota Production System or TPS, were firstly adapted by Toyota, the biggest car manufacture in the world when they developed a new mode of production, in which they focus on the customers and endeavour to reduce all type of waste as much as possible. In their new modes, Toyota has developed such tools which is becoming popular throughout the world, they are: Just-In-Time (JIT), Kanban replenishment system and 5S theory. The idea of lean thinking was indicated in the Womack and Jones (1996) book, in which there are five principles: Specify value An accurate understanding of the precise needs of the customer is required. Hence, the Company needs to find out what the customer wants. Identify the Value Stream Value stream is the set of all necessary activities to achieve an explicit product. Womack and Jones (1996) indicated that determining whole value stream for each product is very important step in order to identify muda (waste), maintain the value-adding activities and add more customer value (which should be continuously improved). Flow McCarron (2006) concluded that in a process, all activities needs to run in a continuous flow. It means that work flow should be steadily without breaking up. Pull Womack and Jones (1996) concluded that it is better the make the customer pull the product rather than let the company push their product. So that, the company will produce what customer needs hence, eliminating waste. Perfection Last but not least, is the perfection, it can be described as the right amount of value added to clients. In the whole process, all activities, work flows have to go smoothly with minimising of waste. Moreover, the motivation of staffs needs to be considering. 3.2. Toyota 14 principles In the book The Toyota Way, Linker (2004) explained fourteen principles of the TPS, those principles will be summarised with the references of Learning Package 3: Principle 1: Base your management decisions on a long-term philosophy, even at the expense of short-term financial goals Principle 2: Create continuous process flow to bring problems to the surface: Principle 3: Use the Pull system to avoid overproduction Principle 4: Level out the workload (Heijunka) Principle 5: Build a culture of stopping to fix problems, to get quality right the first time Principle 6: Standardize tasks are the foundation for continuous improvement and employee empowerment Principle 7: Use visual control so no problems are hidden Principle 8: Use only reliable, thoroughly tested technology that serves your people and processes Principle 9: Grow leaders who thoroughly understand the work, live the philosophy, and teach it to others. Principle 10: Develop exceptional people and teams who follow your companys philosophy Principle 11: Respect your extended network of partners and suppliers by challenging them and helping them improve Principle 12: Go and see for yourself to thoroughly understand the situation (Genchi Genbutsu) Principle 13: Make decisions slowly by consensus, thoroughly consider all options; implement decisions rapidly Principle 14: Become a learning organization through relentless reflection (Hansei) and continuous improvement (Kaizen) 3.3. Lean production in construction Bjornfot (2006) stated that lean principles can be applied to construction based on five principle of Lean Thinking that was indicated by Womack and Jones (1996), they are: Value, Value Stream, Flow, Pull and Perfection. Differences between construction and manufacturing process were mentioned by Cooper (2005) in which he emphasised the lack of co-ordination and communication between parties in construction industry. In addition, it is not easy to forecast principal aspects of a construction project which are time, cost, quality and profit. Pheng and Fang (2005) indicated the term of lean construction as a component of construction best practice, moreover, lean construction is a combination of existing principles. The main significant features in which construction industry are different to other industry can be listed as the huge size of project, the stillness of structure and great complexity. In order to simplify the lean theory applied to construction project, the author decided to use the model of Toyota House to analysis the company problem and indicate improvement for the company. The figure below shows the model of Toyota House which was illustrated by Liker (2004) Figure 2: TPS House Diagram (Liker, 2004) To be explained the application of the improvement process, Liker (2004) believed that lean principles will be built as a house model. There are three critical structures: Foundation and two Pillars and they all supported to the roof which is the continuous improvement of the process. If any of three structures is missing or fragile resulting as the improvement cannot be executed. Therefore, in order to improve the construction process, all of structure in the Toyota House should be considered carefully. 3.3.1. Foundation There are four aspects have to look at in the foundation: Toyota Philosophy (Principle 1) Visual Management (Principle 7) Stable and Standardized processes (Principle 6) Levelled Production (Heijunka, Principle 4). 3.3.2. Pillars There are two pillars in the Toyota House model which are: Just-In-Time (Principle 2, 3), Jidoka (Principle 5,8). Just-in-Time according to Toyota is the manufacturing of particular what they want to make at an accurate point of time with the exact amounts. Hence, using JIT can help the company eliminate wastes, and unexpected requirements in order to improve production process. Liker (2004) indicated some principles to consider in JIT: Continuous flow: this ensure the process will finish without any waste of time and material as well. Takt time: the main part of one piece flow. Takt is the rate in which a product goes through process so as to reach the customer (Liker, 2004) Pull system: as explained as a principle of Lean production. Quick changeover: the ability of process to have quick change when required. Integrated logistics: partners of the company should apply JIT wherever process that they involve in the project. Jidoka: Following Toyota the term Jidoka is described as automation with a human touch. Womack and Jones (1996) made more clear explanation of Jidoka as the ability of system to stop the work automatically when something wrong happens; otherwise all of products have to be verified with high quality. With the purpose of applying Jidoka, those aspects below need to be considered: Automatic stops: when any part of the process cannot satisfy the requirement. Andon: is a caution indicator, it occurs when there is a mistake in the process. Person Machine separation: Following Toyota, this feature let people to warn any irregular condition of process and they can stop the operation of machinery so as to reduce the unnecessary waste. Error proofing: is essential to stop machines automatically. In-Station quality control: it means the quality control have to be ensured within a stage before it goes to another stages; hence reduce faulty product and waste (Liker, 2004) Solve root cause (5-whys): The application of 5-whys method is going to be used in this aspect. The problem will be investigate intensely with the purpose of solving problem (Linker, 2004). 3.3.3. Centre The constituent of this part includes People Teamwork (Principle 9, 10, 11, 13), Waste reduction (Principle 12, 13, 14), Continuous improvement (Principle 14) People and Teamwork: Selection: It is important to select a person can fulfil the task. Inappropriate person can result faulty, delay and more waste to process. Common goals: It is obvious that in an organisation, all members must have same goals in order to develop the organisation. Liker (2004) indicated that common goal is speared within the organisation from top to bottom by the supply chain. Ringi decision making: this aspect ensures that all the people involved to a process should take part in a decision of the improvement. Hence, all possible decisions will be considered. Cross-trained Persons: ability to be able to perform different tasks to improve quality and productivity. (Liker, 2004) Waste reduction: Genchi Genbutsu: see principle 12 in part 3.2 5-whys: is a method by asking Why in five times in order to find the original of a problem. Eyes for waste: it means the company should take time to observe and control waste. Problem solving: to find the problem at root level. Associated with 5-whys method to have the total elimination of waste. Chapter 4: Improvement of current processes 4.1. Lean measurement Using the model of Toyota House presented in the previous chapter, lean measurement of each issue happened in the process of the company will be evaluate in this part. In the table below, the sign x indicates that we can apply the aspect in with the purpose of improving a particular issue of a process. 4.2. General improvement of the company Based on the Lean Measurement table in part 4.1, the author indicates three aspects that very important for the company in general in which the indications of x are huge, they are: People and Teamwork Long-term philosophy Eyes for Waste When the company improve any stage of a project, they firstly should consider all of three aspects below. They are the principles for the development of the whole process, and they should take part in every part of process. 4.2.1. People and team work It is evident that people in the heart of any organisation, even in the high-technology era, the position of people is unchangeable in order to create and operate any kind of machine. Liker and Meier (2007) stated that in choosing an appropriate people with high skills and experiences is the key to achieve a successful process. In order to improve a process, the company needs to develop their staffs first, that is a way Toyota following. Even at that time, the company may not have a good enough staffs for all position. However, the company should have a long-term vision to train exceptional staffs for their important position of the company. Thus, they can improve their organisation. Liker and Meier (2007) suggested the first principle for a leader is the one who has capacity and desire to learn something from other (mean that he is not too self-opinionated). Moreover, Naoum (2001) indicated some more attributes which are: Long-term vision which associates to the benefit of the company. capacity to make decision Confident in his ability and his staffs as well. Liker (2004) convinced that the development of individual and the improvement of teamwork in the company should go together and have balance between them. According to Hardingham (1995), improved team-work is able to decrease cost and develop the effectiveness of production process. Additional, Thompson (2000) persuaded the collaboration of the company will be increased when they are successful in teamwork. In order to achieve effective teamwork, he stated some elements: The team should share a common goal and has enough ability to achieve the goal. Sufficiency of motivation to overcome the mission with high quality of performance. Flexible to harmonise their actions and communication. 4.2.2. Long-term philosophy Liker (2004) indicated the long-term philosophy is the foundation of the other principle, so that the short term decisions need to be associated to the long-term vision of the company. As presented in the company brief, now the company really focus on the term of cost in the project, hence the balance among three factors of a project (time, cost and quality) is not guarantee. Following Liker (2004, p114) and Imai (1991, p49), Toyota had serious thinking of making a product which give more value to customers with good quality at acceptable price. Hence, they did not put the price as the top of their company. Based from this study, the author indicates that the company should change the long-term philosophy as the way Toyota is executing i.e. Value for customer and quality of project not only the lowest price. Imai (1991) stated that the improvement cannot be finished if there is not any standard. Hence, the establishment standard is necessary for any organisation or project in order to make improvements. Moreover, he also concluded the Kaizen (continuous improvement) is called as never-ending efforts for improvement, it can be understood that when a standard achieved, the better standard will be occurred and then this become the next goal of the process. The figure below will show the PDCA cycle or in other words is a Continuation of the Deming Wheel, which indicates the cycle of continuous improvement. 4.2.3. Eyes for waste This aspect was presented in the part 3.3.3 The main principle of Lean Production is eliminating waste in process. Thus, it is clear that every people within the organisation should care about waste issue. The company requires ensuring all of their employees and partners must observe any waste in the whole process and do the best to reduce wastes as much as possible. 4.3. Analysis of improvement in Pre-construction and construction phase 4.3.1. Pre-construction Process As mentioned in part 2.3, problems existing in this stage of project include which are insufficient information from the company in tender action and the concentration of cost of the company. Hence, the quality of the sub-contractors and suppliers are not very good and sometime they could not afford the quality and time of the project. In order to improve the tender documents, the company must have standards for their tender, so that when they reach those standards the document will have good quality. Hence, sub-contractors and suppliers have to make their documents carefully before submitting. As a result, the quality of the process will improve. Moreover, using Ringi decision with the participation of all departments involved to project will help the company establish a quality tender document In the solution for choosing lowest tender, initially, the company should apply the method of Solve root cause problems to find the origin reasons. Using 5 whys technique is a good answer for this situation. Reasons may relate to the long-term vision of the company in which the cost is focused. 4.3.2. Construction Process The problems in is phase were explained in part 2.4, in order to solve problems and make improvement, the author will divided construction into many issues and analyse development of each of them. There are five issues in the process: a. Input for planning process One of the problems in this process is the lack of input from in involved parties, as stated in the pre-construction phase, using stable and standardised process and Ringi decision techniques can be solution for this issue. All the sub-contractors and suppliers should work enthusiastically until they get the standards established by the company, moreover they have to involve to any decision related to their contributions. b. Updating plan schedule One of trouble is the implementation of a project is very early so that the company do not have enough time for the preparation of construction works. In addition, weak collaboration between involved parties results to an unsuitable plan schedule (including sectional master plan and weekly master plan). The first technique can used to improve the situation is stable and standardised technique. It means that when the updating the Master schedule, the company need to attain their standard which is the foundation for any further improvement. The second method is the application of Pull system, the sectional and weekly plan should base on actual conditions on construction site, the construction department, particularly the site department. To be explained this point, the construction department is the one who control all the works on site, they will have whole understanding of what is happening on site, so they can make an appropriate plan for the project. In addition, all the involved parties such as suppliers, sub-contractors and other departments should have involvement to make a plan that suitable for them. Another issue that is important in this process is the quality of plan. In order to achieve this aim, the application of creating continuous flow, lev

Some Notes Concerning Affections and the Sublime in the Work of Jonatha

Some Notes Concerning Affections and the Sublime in the Work of Jonathan Edward Jonathan Edwards’s attention to the separation of the body from the soul combined with his efforts to account for the spirit of revivalism during the â€Å"Great Awakening† implicates the sublime as both a rhetorical tool and psychological experience that, in either case, foregrounds the relationship between an individual’s perception of the self and his or her relationship to a community. Comparing Edwards’s personal writing to his public writing , an exploration of the phenomenon of conversion is clearly developed. Sublime experiences represent potential moments for conversion to Christianity because such events are moments that define the self in absence from the community. Edwards himself insisted that conversion testimony be required for admittance to the Puritan community. Rarely argued in Edwards scholarship, his focus upon philosophy and theology may be an attempt to both scientifically explain the moment of possible conversion and theological ly typify the conversion experience. Whereas he wasn’t seeking to standardize conversion, he was attempting to normalize it, to make it practical. In this way, Edwards is a pioneer in American pragmatics. The moment of conversion, whether or not it is genuine, is a monumental moment because it builds community by uniting an individual’s self-concerned state of being with the Puritan community’s dependence upon the conversion narrative. Each conversion strengthens the community; however, the community has no control over the conversion experience. Hence, the desire to justify, to authenticate, each conversion. For, unless shared through narrative, sublime moments are strictly private affairs. Wh... ...S. Stout, and Kenneth P. Minkema. New Haven and London: Yale UP, 1995. ---. â€Å"Sinners in the Hands of an Angry God.† A Jonathan Edwards Reader. Ed. John E. Smith, Harry S. Stout, and Kenneth P. Minkema. New Haven and London: Yale UP, 1995. ---. â€Å"The Spider Letter.† A Jonathan Edwards Reader. Ed. John E. Smith, Harry S. Stout, and Kenneth P. Minkema. New Haven and London: Yale UP, 1995. ---. â€Å"A Treatise Concerning Religious Affections.† A Jonathan Edwards Reader. Ed. John E. Smith, Harry S. Stout, and Kenneth P. Minkema. New Haven and London: Yale UP, 1995. Longinus. On the Sublime. Trans. by W. Hamilton Fye. Cambridge: Harvard UP, 1965. Monk, Samuel H. The Sublime. Ann Arbor: U Michigan P, 1960. Wainwright, William J. Reason and the Heart: A Prolegomenon to a Critique of Passional Reason. Ithaca and London: Cornell UP, 1995.

Crown Cork and Seal

Crown Cork and Seal Competitive Environment Analysis Exercise Corporate Purpose Crown Cork and Seal had three segments Metal Containers (cans), Closures (crowns), and packaging equipment. Metal containers are cans used in things such as soft drinks or aerosol cans. These were made from steel until being switched over to aluminum in the early 80’s. Crowns which are closures for any type item such as a jar. â€Å"Metal containers generated 65% of Crown’s $1. 88 billion 1988 sales, while closures generated 30% and packaging equipment 5%. † The mission of Crown Cork and Seal was to â€Å"be successful. To do this Connelly had to take control of cost. He did this by first trimming the workforce by letting go anyone not needed which reduced payroll by 24%. â€Å"The second step was to institute the concept of accountability. † He did this by instilling pride and a sense of workmanship in the employees. He also gave plant managers â€Å"responsibility for plan t profitability† as well as quality and customer service. Last but not leased he focused on the company’s debt. He paid off the banks through â€Å"inventory reduction and liquidation. †His vision and strategy for the future emphasized â€Å"cost efficiency, quality, and customer service. Connelly did this by focusing on the company’s strengths. He was able to improve on their strengths by focusing on the beverage can and new aerosol market. Simultaneously, he improved manufacturing including adapting to customer needs. Environment Analysis: General Environment: Demographic: 1989 over 120,795,000 metal cans were sold. Socio-Culture: The movement away from metal cans to plastic and glass has been a problem as they gain a bigger market share. Political-Legal:Political will play a big part in recycling and the push for â€Å"going green. This will also take effect for the legal aspects as new laws will be in place for more recycling and cleaners running man ufacturing plants. Technological:Shut down old out dated plants and opened up new plants across the US with new equipment. Economic: As higher gas prices hit lighter products such as plastic will be more economical to ship to customers verses a heavier metal can. Global: Connelly focused on international growth. He specifically targeted developing countries. Soon foreign plants generated 44% of sales and 54% of operating profits. Competitive environment: Buyers The competitive environment for the buyers appears to favor the buyers over Crown Cork and Seal and its competitors for many reasons. Major buyers in this industry include Coca-Cola Company and Incorporated, Anheuser-Busch, and PepsiCo. In other words there are a low number of buyers, all of which are very large and powerful companies. The size distribution is mostly centered on these major buyers; however there are other companies such as Seagram’s, Molson, and Labatt. Because there are so few companies for CCS to sell to, a high percentage of sales are dependent on these buyers. This low number of buyers is due to consolidation within the soft drink segment, from 8,000 bottlers in 1980 to about 800 in 1989. Generally 45% of the total cost to buyers went into purchasing the cans. Due to the total cost of cans, buyers try to maintain many relationships with many can makers to increase bargaining power and reduce costs. As a result of this the buyer is not heavily dependent on one single can company. Switching costs are also lower for buyers for the same reason; they already have many resources to choose from. Buyers also are likely to profit fairly well compared to can manufacturers. Can manufacturers must maintain low prices in order to compete with each other to gain share over these very few yet powerful buyers. Some brewers are avoiding switching costs all together through backward entry into the market. By 1989, due to production of cans by â€Å"captive† plants, 25% of all can output was produced by captive plants. By 1980 brewers had capability to supply 55% of their can needs. As a result threat of backward entry is very likely for brewers. It is easier for brewers to do this because they make high-volume single-label products. While at the same time soft drink industry could not easily do this because they focused on low-volume multiple-label products. The aluminum can has three major substitutes buyers can choose from: Plastic bottles, which constituted for 11% of soft drink sales in 1989 along with a growth rate from 9 to 18% from 1980 to 1989; Glass bottles, which constituted for 14% of sales in the soft drink industry in 1989; and steel cans. The aluminum can however is a unique and valuable product to the industry, which is why they constituted for 75% of total sales in 1989. As stated in the case aluminum has many advantages over its substitutes. Aluminum is lighter than glass and steel, aluminum is easy to handle and fill, aluminum allows for a wider variety of graphics options, and also consumers prefer aluminum. Because this product is so unique and advanced, it absolutely increases the buyer’s product quality. Cans have a longer shelf life than plastics and bottles, they are lighter and easier to handle, and since they are coated with a protected seal inside the can taste is not sacrificed. All of which add value and quality to the finished product given to be consumed. Suppliers There are three large aluminum suppliers: Alcoa, Alcan, and Reynolds Metals. Alcoa is the largest producer of aluminum with sales of $9. 8 billion, Alcan ranked a close second with $8. 5 billion in sales, and Reynolds Metals is ranked second in the united states with sales of $5. 6 billion. The percentage of our supplies that come from large suppliers are 21% aluminum and 23% steel. Crown Cork and Seal represents 61% of sales for large suppliers. The supplied product is unique in that they have injected the aluminum cans gas to help the metal retain its shape. This allows the cans to hold more than just caffeinated beverages. Also, the steel is produced thinner to cut costs and weight and there are even steel/ aluminum mixes. In addition to aluminum and steel, there are glass and plastic suppliers that offer unique products based on function. There are always substitutes for a particular supplied product. With the advancement in technology, a cheaper, lighter product could be developed or a new innovative product could be discovered. For example: Bottling has transitioned over the decades from being primarily glass, then to steel, and now aluminum. The cost for switching a particular supplied product would be $20-$25 million based on the finding of switching from three piece to two piece cans. From reviewing the case, there does not seem to be a supplier that is excessively profitable. Even though Alcoa has the largest share of the market making $9. 8 billion in sales, Alcan is not too far behind with the $8. 5 billion. The other suppliers could always come out with a product which would give them a greater competitive advantage, and give threaten Alcoa’s top ranking position. In addition to profitability, there is a great likely hood to forward entry by a supplier. Reynolds Metals, who is a supplier, sold over 11 billion cans itself. The supplier’s product is very important to our product quality. The difference between the value of resources used and the value of the aluminum can to the brewer makes up the surplus value between what the supplier sells the aluminum for and what Crown Cork and Seal can get for it. Competitors Entrants There are a number of threatening entrants to the can manufacturing business. As the market continues to see more suppliers producing cans, and more brewers skipping the middle man (can manufacturer), the threat becomes more serious. Substitutes The shift towards plastic bottles, and perhaps more innovative materials are the threats to substitutes for cans. Corporate Profitability and Productivity: Please See Appendix A Threats to Competitive Equilibrium A 10X force that may come from the general environment to greatly disturb Crown Cork and Seal’s equilibrium in the market might be a socio-cultural shift to be more health conscious. This may hurt the soft drink industry especially hard since they are so high in sugar and there is an epidemic of diabetes and childhood obesity in America. In 1989, soft drinks accounted for more than 50% of the beverage industry. If the health craze were to gain momentum, it could cut into soft drink sales severely. This would increase the market for water and juices. However, water and juice tend to come in plastic containers for the most part. Crown, Cork & Seal never got into the plastics market and this could be a huge problem for them. If they do not find a new market for their products they might be left out in the cold once a health revolution occurs in society. The impact on sales would be overwhelming. This would bring profits way down and they may even start to have losses if they do not make adjustments fast enough. Their assets may also decrease in value because there would be less demand for can making machines due to an increase in the need for plastics making machines. With this massive shift in end-user sentiment, Crown, Cork, and Seal would have trouble convincing investors and banks to bet on them thus increasing their cost of capital greatly. A 10X force from the competitive environment could come from Crown, Cork, and Seal’s buyers, especially soft drink bottlers. There has been a trend of consolidation among soft drink bottlers and they have used this to gain leverage over their suppliers and get discounts for their bulk orders. If they were to continue with this trend of consolidation, it could create a scenario in which the bottlers could make their cans in-house cheaper than ordering them from companies like Crown, Cork, and Seal. This would be devastating for Crown, Cork, and Seal to say the least. Since soft drink bottlers are Crown, Cork, and Seal’s largest buyer, this would likely put so much stress on the company that it would eventually become obsolete unless the trend changed or the company shifted their focus before it was too late. This 10X force would bring sales way down for Crown, Cork, and Seal. Even if their sales were not hit as hard as possible, their profits would likely suffer anyway because of the pressure their buyers would be able to put on them with the threat of in-house can manufacturing. Their assets would not drop too much in value because there would still be a market for can manufacturing equipment in this scenario. Crown, Cork, and Seal would likely find it more difficult to attract investors to their company and even their cost of debt would increase with a likely decrease in the rating of their bonds. These two setbacks would drive up their cost of capital and make it difficult to raise money to shift their focus if they wait too long to do so.

Free Essays on Illegal Music

Illegal music Music burning websites like www.napster.com use to burn illegal music. Napster use to be one of the top CD burning web site until they were shut down. Some people don’t understand that burning CD’s makes the music stars lose lots of money. I asked a teen why did he think CD burning was an important topic, he said â€Å"it’s making the rap stars lose money†, I think he was right. After I talked to him he told me he found his information off of commercials and the web. I asked a student and she replied â€Å"you have to buy the CD’s yourself†. This young lady told me she found this information shopping at stores. Me, I think as a matter of a fact I know that it effect thousands of people. I asked a young teen in middle school where did he find his information and he replied â€Å"Music stars have commercials on television†. There are many solutions for kids to do instead of burn music. They can work for the money and buy the CD, they can go to a friends and listen to there CD’s or they can do what kids are suppose to do which is to have fun. All that the music stars want us to do is not burn their music. They want us to buy it legally. Me, I have burned a couple of CD’s illegally. According to the recording Industry Association of America (RIAA) illegal music download sites will never be eradicated. Cary Sherman told BBC News Online that music would always be available for free somewhere on the net. No matter the costly court battles to shut down illegal music sites. From research I found on BBC news one of the chairman Mr. Sherman said, â€Å"Our aim is not to completely eliminate music piracy or illegal peer-to-peer services altogether,†. The people of RIAA say that as long as within reasonable amount of control then we will be happy but we are still a long way from that. Mark Mulligan one of the analyst with Jupiter research, agreed that the music industry would never fully be able to eradicate illegal fil... Free Essays on Illegal Music Free Essays on Illegal Music Illegal music Music burning websites like www.napster.com use to burn illegal music. Napster use to be one of the top CD burning web site until they were shut down. Some people don’t understand that burning CD’s makes the music stars lose lots of money. I asked a teen why did he think CD burning was an important topic, he said â€Å"it’s making the rap stars lose money†, I think he was right. After I talked to him he told me he found his information off of commercials and the web. I asked a student and she replied â€Å"you have to buy the CD’s yourself†. This young lady told me she found this information shopping at stores. Me, I think as a matter of a fact I know that it effect thousands of people. I asked a young teen in middle school where did he find his information and he replied â€Å"Music stars have commercials on television†. There are many solutions for kids to do instead of burn music. They can work for the money and buy the CD, they can go to a friends and listen to there CD’s or they can do what kids are suppose to do which is to have fun. All that the music stars want us to do is not burn their music. They want us to buy it legally. Me, I have burned a couple of CD’s illegally. According to the recording Industry Association of America (RIAA) illegal music download sites will never be eradicated. Cary Sherman told BBC News Online that music would always be available for free somewhere on the net. No matter the costly court battles to shut down illegal music sites. From research I found on BBC news one of the chairman Mr. Sherman said, â€Å"Our aim is not to completely eliminate music piracy or illegal peer-to-peer services altogether,†. The people of RIAA say that as long as within reasonable amount of control then we will be happy but we are still a long way from that. Mark Mulligan one of the analyst with Jupiter research, agreed that the music industry would never fully be able to eradicate illegal fil...

Syllabus for Mass Communication and Media Studies Essays

Syllabus for Mass Communication and Media Studies Essays Syllabus for Mass Communication and Media Studies Paper Syllabus for Mass Communication and Media Studies Paper In this frame and then select File Print Frame to print this page Course Description (Formerly COM AAA. Fulfills the general education requirement In communications but is not a writing course. ) Prerequisite: WRIT 101 or WRIT 101 S. A survey of mass communication designed to enhance media literacy. The goal is to interpret, evaluate, and produce media messages. Topics include media industries and the impact of the media, as well as regulation, policy, and ethical issues. Emphasis is on critical thinking and analysis of vital aspects of pervasive elements of popular culture, such as news, advertising, childrens entertainment, and a free press. Students may receive credit for only one of the following courses: COM AAA or COM 302. Course Introduction We live In a media-saturated culture where media literacy Is Important. This course Is designed to make you a more literate consumer and potential producer of media content. Course topics will Include the following: 1 . Overview of Mass Communication (background, historical/cultural aspects) 2. Print Media (newspapers, magazines, book publishing) 3. Electronic Media (radio, sound recording, motion pictures, television, the Internet) 4. Media Professions (news, public relations, advertising) 5. Regulation of the Mass Media (laws, rules, regulations, and ethics) 6. Impact of Mass Communication (global perspective and social effects) Course Goals/ObJectives After completing this course, you should be able to: 1 . Demonstrate media literacy by accessing, Interpreting, evaluating, and producing media messages 2. Trace the development and evolution of mass media In order to analyze, interpret, and evaluate the role, impact, and regulation of media in society 3. Recognize and apply mass communication theories in order to analyze, interpret, and evaluate how media shape peoples views of reality. Course Materials Title: Dynamics of Mass Communication (SIS) Author: Dominick, Joseph Edition: 12TH Copyright: 2012 publisher: MCGRAW HILL (Singapore) ISBN: 9780071318266 Grading Information Class Participation: 20 percent Writing Assignment: 25 percent Midterm Exam: 25 percent Final Exam: 30 percent TOTAL: 100 percent Technical Requirements for Written Assignments: Written assignments will be valuated on your command of the following technical and formatting skills: Spelling and Grammar Content and understanding of course concepts Strong thesis and/or argument Originality of topic, thesis and research Extent of research and sources used (No Wisped, please! Properly attribution of sources with proper in-text MEAL formatting The grade ranges for this course are as follows: 90-100 = A 80-89 = B 70-79 = c 60-69 = D 59 F Project Descriptions Reading Assignments: Reading assignments are to be completed on time (I. E. , by the Monday of the week they are scheduled for discussion). You shou ld be prepared to participate in class discussions about the assigned reading. Participation will count toward the class participation portion of your grade. Writing Assignment: You will be required to prepare a 5-7 page (double-spaced) analysis of a topic related to mass communication. Specific topics will be yours to choose, based on the readings, class discussions and topics raised in this course. It is possible that not everyone shares the same views as you. Free and open discussions, which include the opportunity for intellectual and emotional disagreement, are fundamental in an educational environment and should be expected by all class members. Language In this course, our language should not discriminate on the basis of age, color, disability, economic status, educational background, ethnicity, marital status, national origin, personal appearance, political affiliation, race, religion, sex, or sexual orientation. Written work should conform to standard rules of English usage, grammar and spelling. One final note: please dont plagiarism. In the past, I have personally caught FOUR students trying to turn in essays and/or assignments copied from other sources. COMIC instructors have access to sophisticated tools to root out plagiarism. To put it succinctly, if you cheat I will catch you and you will fail this course. If you take research or information from another source, cite it properly and you should be fine. Plagiarism is the theft of intellectual property and results in an automatic failing grade. Academic Policies Academic Policies are not course specific and are therefore created and housed separately from this syllabus. You may access and print Academic Policies from the Syllabus sub-menu in your classroom.

Offsite manufacturing in the construction industry Essay

Offsite manufacturing in the construction industry - Essay Example Introduction and Context Too often construction projects conducted on site have exhibited inefficient project processes, low integration among team members, poor productivity levels, and poor performance in safety and health. In comparison the manufacturing sector does not normally experience these repercussions which has led some innovative mind in the industry to consider a better way. This turned out to be off site building, which has been noted to have many advantages over traditional construction (Ogden, 2007). In the light of the need for Zenith PM to develop a new strategy to improve its revenues and retain its skilled personnel, the company has identified off-site construction as its most viable option. Current thinking on offsite manufacturing New developments The off-site construction trend grew significantly in 2006 in various countries worldwide, partly because clients and contracts have come to realise its benefits in terms of lower cost, better quality, predictability o f outcome, sustainability, and better compliance with health and safety standards. The off-site industry is still in its infancy despite the rise in the demand for its products; at this point, the industry is still a diverse and fragmented group of technologies and off-site producers. There is certainly room for further development which, as the sector matures, will enhance standardisation and regulation so that clients and contractors could benefit from more reliable products and also more options per product. There are currently four off-site construction techniques where the manufacturing or fabrication is performed away from the project site and before the installation. Na and Bausman (2008) identified these as: (1) Offsite preassembly, referring to the process wherein different building materials, equipment, and prefabricated components are assembled at a remote location for later installation. It is focused on a system instead of a product. One example is roof trusses, or prea ssembled vessels complete with installations, platforms piping and ladders. (2) Hybrid systems are prefabricated building facilities, i.e. they are building units that are fully factory finished, complete with internal furnishes and building services. An example is a factory finished bathroom with interior finishing, plumbing, electrical service, and factory completed office rooms. (3) Panelized Building Systems are comprised of the structural frame, or building envelop, employing factory manufactured building panels. These consist more of factory-built components rather than completed modules – usually including the factory based fabrication like finished wall panels with cladding insulation, internal finishes, doors and windows. They are brought to the site and are there assembled and permanently secured (4) Modular buildings are popularly known as the factory-built homes of one or more units completely assembled or fabricated in a manufacturing plant far from the jobsite. They consist typically of multi-rooms with three-dimensional units, that are constructed and pre-assembled and already include installed trim work, electrical, mechanical, and plumbing. After fabrication, they are transported and assembled on site. Benefits and core challenges There are a host of benefits brought about by off-site construction that have been long-recognized by the HSE and other monitoring agencies. These include ‘predictability, quality assurance, faster construction times, less waste,

Nursing Research Article Example | Topics and Well Written Essays - 250 words - 1

Nursing Research - Article Example This study highlights that  in terms of gender, the authors derived that Latinas were at a higher risk of developing diabetes compared to Latino men. However, most alcoholics and smokers were male college students. The authors established that females had better healthy eating patterns compared to men. However, more Latino males participated in physical activities. In terms of generational status, the authors established no differences in fast food consumption, drinking, physical activity, and smoking.The collected demographic information was part of the research design where it can develop relevant treatment interventions for young Latinos with diabetes. The demographic information sought to describe the health behaviors that can help Latino students with diabetes. Moreover, the information described the population of the participants in the research. Indeed, demographic information describes research population.This paper outlines that the demographic information collected by the authors related to age, gender, and generational status of the 156 Latino undergraduate college students who participated in the study. The authors established that younger college-age participants aged between 18 and 24 years old have less healthy eating patterns compared to participants above 24 years old.  They also established that participants aged 36 years and oldersacrificed more time for physical activity compared to college-age students and those between 25 to 35 years of age.